Used Bantam 24-Ton Press Brake

Used Bantam Press Brake
Model: B424

Specifications

4' Bed Width
24-ton Bending Capacity
13" Ram Height
19 / 21-1/2" Max. Back Gauge Depth*
* Full 21-1/2" back gauge depth possible only on sheets 7" narrower than maximum width. Maximum back gauge depth is reduced by 2 inches when equipped with micro-adjustable gauge option.
4.4 ft3 Max. Free Air
20 SPM Max. Speed @ Full Stroke
2835 Lbs. Shipping Weight (Approx.)
Fully Pneumatic Operation
Operates from 10 to 110 PSI (rated @ 90 PSI)
Variable Tonnage Control
Adjust Ram Force via Pressure Regulator
Ram Speed Control
Adjustable Stroke Depth Control
Adjustable Die Space
Modular FRL Unit
Includes 4150 Tool Steel Die Set Consisting of a 90° Top Punch and 3/4" Bottom Die
Includes Foot Pedal Control
Made in America

Standard Features on All 24-Ton Bantam Models

- Ram stroke 0 to 2"
- Bed adjustment 3"
- Window depth x height 6 x 8-3/4"
- Bed and ram thickness 1.75"
- Back gauge depth 0 to 19" between housings, 21" between cylinders
- Full stroke free air 4.4 CFS
- Max. speed 20 SPM
- Two air cylinders push up a simple lever that pushes the ram down. Motion stops when a screw adjusted positive stop bottoms out.
- Foot pedal standard. Removing foot from pedal exhausts air and gravity retracts the counter-weight lever
- Unique 1/4" OSHA gap adjustable bed. Bed is vertically adjustable using leveling screws to accommodate various vee die heights, to parallel the bed to the ram and if possible, eliminate pinch point
- Select optimal speed with a tamper-proof ram speed valve. A minimum setting creates a creep mode for set-up, pressing or bending to scribe a line without affected generated force.
- Runs on compressed air (90 PSI provides rated tonnage, no 3 phase power required), uses from 10-110 PSI.
- Includes quiet long-life, steel reinforced cylinder bumpers Tooling space 9-1/2"
- Made in USA