KRRAS Gauge Positioning System

KRRAS Gauge Positioning Systems
KRRAS Gauge Positioning System -GPS Model 1
MPF RETROFIT BACKGAUGE SYSTEM

Digital Display Readout (DRO)

Model MPF -Digital Readout (MAPER-Italy)

For X Axis (Back gauge)
Inverter Control Normal AC Motor
Selector for Fast Slow Speed
Push Button For Forward Reverse

Complete with:

8ft Length Back gauge Bar
2 sets Adjustable Finger

KRRAS Gauge Positioning System -GPS Model 2

HT 071 NC RETROFIT BACKGAUGE SYSTEM
Single Axis NC Program Controller
Model HT071 (MAPER-Italy)

For X Axis (Back gauge)
Specifically designed to control press brake back gauge.
Single bend 'go to' positioning
Simple +- mode for forward and reverse
Programming of sequence of bend in automatic.
99 program each with 20 steps
The system features bend allowance and inch/mm conversion.

Complete with:

AC Normal Motor and frequency inverter
8ft Length Back gauge Bar
2 sets Adjustable Finger

KRRAS Gauge Positioning System -GPS Model 3
HT 072 NC RETROFIT BACKGAUGE SYSTEM
Two Axis NC Program Controller
Model HT072 (MAPER-Italy)

Specifically designed for press brake back gauge and bending depth
Simple +- mode in manual and programming of a sequence of bend in automatic.
For X-Axis (Back gauge); Y Axis (Bending Depth)
99 program each with 20 steps
The system features bend allowance and inch/mm conversion.

Complete with:

2 units AC Normal Motor and frequency inverter
8ft Length Back gauge Bar
2 sets Adjustable Finger
With additional motor, belt and pulley for Y Axis

Note: User need to attach motor, belt and pulley to press brake. If existing motor is available it should be below 1HP and 220V. Its is possible for to supply a higher capacity inverter as option.

KRRAS Gauge Positioning System -GPS Model SV3
DELEM DAC-310 CNC RETROFIT BACKAGUGE SYSTEM
SINGLE-AXIS PROGRAMMABLE CONTROLLER
Model DAC-310 (DELEM-Holland)

Bright LCD display
Back gauge control
Actual and Programmed position visualization.
Programmable up to 100 steps
Stock counter
Back gauge can be moved manually by selecting push buttons in 2 different speeds.
User-friendly one-touch programming
Inch/mm selection
Panel-based housing

Complete with:

AC Servo Motor and Drive (Japan-YASKAWA)
8ft Length Back gauge Bar with Liner Rail (HIWIN)
2 sets Adjustable Finger on runner Block

KRRAS Gauge Positioning System -GPS Model SV4
DELEM DA-41 CNC RETROFIT BACKAGUGE SYSTEM
Compact dual axis control for conventional press brake
Model DA-41 (DELEM-Holland)

Bright LCD display
Beam stop control
Back gauge control
Angle programming
Tool programming
Retract function
Up to 100 programs & 25 bends per program
Panel based housing
Inch/mm selection
Stock counter

Complete with:

AC Servo Motor and Drive (Japan-YASKAWA)
8ft Length Back gauge Bar with Liner Rail (HIWIN)
2 sets Adjustable Finger on runner Block
Additional servomotor, belt and pulley for Y-Axis

Note: User needs to attach motor, belt and pulley to press brake.
Buyer also needs to be familiar with DELEM DA 41 to set up for the depth settings and controller functions.